Abstract In this study, the microstructural-based finite element modeling of dual-phase steels was investigated to visualize the crack initiation and its propagation through the phases that exist in the material. The parameters of various failure models, including Gurson, Gurson-Johnson-Cook, and Johnson-Cook (JC), were calibrated for different microstructure levels of DP600, DP800, and DP1000 steels. The onset of cracking, nucleation, void growth, and coalescence was determined using the models. As a result of the optimization studies, there is not much difference between the flow curves of the materials and the tensile values calculated from the tensile tests for DP600 and DP800, while it is slightly higher for DP1000. However, considering the fracture, martensite phases were found to be the main determinant of this situation. Cracks that start in the martensite phases then propagate through the ferrite phase and eventually cause the material to break. According to the results of the simulations, the difference between the experiments and the simulation results of the Gurson is 3.33%, the Gurson-JC is 1.82%, and the JC model is 2.39%.

Abstract In this paper the effects of deformation modes on martensitic transformation for TRIP steels which are composed of Ferrite, Bainite and Retained austenite are investigated in the view of the microstructural level. For this porpose the simulations are run for a synthetically generated microstructure which have 55% Ferrit, 35% Bainite and 10% Retained austenite. In the simulations tensile, biaxial and shear type deformation modes are considered. The results reveal that biaxially loaded microstructure has the maximum amounts of martensite phases at the end of the given deformation and the less martensite is occurred in the shear type loading condition.

Abstract In recent years, the studies on the enhancement of the prediction capability of the sheet metal forming simulations have increased remarkably. Among the used models in the finite element simulations, the yield criteria and hardening models have a great importance for the prediction of the formability and springback. The required model parameters are determined by using the several test results, i.e. tensile, compression, biaxial stretching tests (bulge test) and cyclic tests (tension-compression). In this study, the Yoshida-Uemori (combined isotropic and kinematic) hardening model is used to determine the performance of the springback prediction. The model parameters are determined by the optimization processes of the cyclic test by finite element simulations. However, in the study besides the cyclic tests, the model parameters are also evaluated by the optimization process of both cyclic and V-die bending simulations. The springback angle predictions with the model parameters obtained by the optimization of both cyclic and V-die bending simulations are found to mimic the experimental results in a better way than those obtained from only cyclic tests. However, the cyclic simulation results are found to be close enough to the experimental results.